Using my back up equipment today. I used this set for an entire 2 years before getting my new rig.
Support the channel by using my affiliate link
You don’t pay more, I just receive a small % of the sale. Thanks 😊
Using my back up equipment today. I used this set for an entire 2 years before getting my new rig.
Support the channel by using my affiliate link
You don’t pay more, I just receive a small % of the sale. Thanks 😊
Great video Paul
I recently went to a carpet cleaning supplier to buy a crb machine, rotary buffer and chemicals. They told me I would need a hot water extraction machine to successfully clean domestic carpets. Kind of burst my bubble, what is your advice? Thanks.
Why not stay with vlm Paul?
How many psi is the tornado which model arw you using
Will a 2000 watt generator hav enough power to run this portable cleaner
Where can I purchase one ?
Don't run water over 130-135 or you will destroy your pump! Most pumps say no more than 140!
It’s a $12000 fine dumping your waste water like that here in Oregon. I wouldn’t show that if I were you. Good video though.
Have you use that green dragon for hot water extraction? If so hows it working for you? Im About to order a new product
Is there a specific smaller attachment that would be used on a vehicle for carpet cleaning?
that pup was adorable
is that the ECO 500 model tornado?
Looks like an awesome system, after using various truck mounts and portables, I have found that using an oversized vacuum hose, the air flow losses are much less. In my truck mount I use 75 feet of 2.5 inch hose and only a 25 foot 2inch leader hose. In your case, I really feel that if you tried putting a 2inch vacuum port in your portable, and using either only 2inch hose or using mostly 2 inch hose with a short 1.5 inch leader, you would find that you could retain almost all of the airflow that you have right at the machine. I know most cleaners don’t do this due to the added space and labor involved with larger hoses, but hopefully is worth a thought at least. Thanks for sharing this nice video.
Nice !
Awesome video as I have almost the same setup – I'm just starting out – I have both the Mytee air and water hog and the steambrite 3 stage vacuum booster screwed onto the airhog – crazy amount of suction can't even measure it – right off the gauge. I'm also using the Oreck for both bonnet and pad cleaning. As for heat I am using the 1000 heater as a preheat in the water hog but also running an external heater and able to exceed 200 degrees if needed.
So u sit heaters all the way in the tank of your machine?? So the cord is also in water??
I use to boil water while cleaning so it will be nice, hot, and ready to go when I needed to refill.
That’s a powerful little machine, I need a good portable, thanks for sharing 👍🏾
Wow! Great alternative instead of a truck mount.
Hope you film it in action! That looks satisfying to see operated!
Fighter jet power lol
Wow! That thing is a MONSTER against dirt!