Instructions:
First I sweep all the areas thoroughly with a a broom
Second I mix 12 oz of odor death into a gallon of warm water. I then mop it onto the floors in a visible slight wet layer. It attacks the urine at the source, not masking the smell but eliminating it. It must reach the urine to work. In this video there were two small areas that the urine went below the boards. I could change these boards out, but it wasn’t necessary thanks to the ozone treatment.

I mopped on the odor death and let it sit 5 minutes. Don’t leave moisture on your floors any longer ( to prevent damage). I then use a dry flat microfiber pad ( like a swifter style mop) to remove the moisture. Wait an hour then repeated 3 more times. The black UV light revealed that all the Pee was gone from the open areas and the subfloor. WHAAHOO! 🙏

Only the two small areas still revealed the UV reflection. Probably due to humid areas that opened the pores In The laminate, allowing the urine to go below the surface.
Rather then change the boards, I used my ozone machine to eliminate any remaining odors. Please read the instructions on your ozone machine it can be dangerous if improperly used
Worked incredible!!!
( 2- one hour treatments a few hours apart The next day I decided to do one more hour treatment)

If this helps you please thumbs up the video and SUBSCRIBE 😊
Thanks
Pauly’C 👍🏼

***Ozone machine***

Not Sponsored

Ozone Machine Odor Removal | 10000 mg/h High Capacity Ozone Generator for Large Space | 2 Timing Functions, Compact & Carry Handle | Home, Bar or Office (Yellow) https://a.co/d/6Vzd449

***Odor death (chlorine dioxide)***

Want professional Stuff?
Equipment
Pads
Chemicals
and More…
Be Like The Pro’s @ Wa-Pro Carpet Cleaning! Follow the link below

https://encapstore.com/?aff=9

source

5 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here