Creator of the motive force
Maker of my driver
I purchase the whole lot from Encapstore
All Skilled Stuff 👍🏻
Help the channel through the use of my affiliate hyperlink
You don’t pay extra, I simply obtain a small % of the sale. Thanks 😊
Creator of the motive force
Maker of my driver
I purchase the whole lot from Encapstore
All Skilled Stuff 👍🏻
Help the channel through the use of my affiliate hyperlink
You don’t pay extra, I simply obtain a small % of the sale. Thanks 😊
Hey Pauly I've herd you mention were u bought ur works sprayer refurbished, mind sharing that again pls! Thanks!!
I have been using the original Oreck pad driver that tears up the Glad pads (these are my favorite pads), but I have been using a black 12" or 13" stripping pad on the Oreck pad driver, then putting the Glad pads to the black stripping pad. Essentially making the black stripping pad the pad driver for the Glad pads. Very simple.
🔥🔥🔥
Thank You, this was a great video. I wasn't sure I would find what I was looking, and I was anxious. However, you saved my day! Your kindness was greatly appreciated. Good Job.
Awesome Job with fantastic results 👌👌👌
Nice! Al did a nice job with that driver and you can see how the force was distributed across the entire surface of the glad pad and improves the efficiency of the orbiter. The glad pads seem to be just the right size. If I use 17-inch microfiber pads I generally need to use a glider or things will start to vibrate a bit.
I wanted to know if the dupray can get the same results as the orbiter even with the area that would need pre treatment. I noticed that you now almost use the oreck exclusively. So would you recommend the oreck over the dupray for carpet cleaning?
Where did you buy it???
I used a christmas serving tray as a pattern then cut the circles out on a band saw. I spray glued them together, then I sanded the outer perimeter.
Here are the links to the materials I used to make the pad driver adapter:
https://smile.amazon.com/gp/product/B08C9S9XFJ/ref=ppx_yo_dt_b_asin_image_o06_s01?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B08BRV3F4R/ref=ppx_yo_dt_b_asin_image_o06_s00?ie=UTF8&psc=1
Glad you like the driver. We’ll see how they hold up. For those who want to make one, they cost about $15.00 to make. When you buy the materials, you get enough to make 2 maybe 3. I did it for the glory, not the money! Finch glued his to his Oreck driver. Since I had the velcro, I thought why not make it a stick on.
I just bought a 15" shower feed driver for my 13" Koblenz. I couldn't find a 13" for it so I went with the MalishTri-lok driver.
Great video.
So much soil you did good for my OCD so satisfying 😍❤️💯🔥✅🙏🏼