Nice Paul 👍 Now that you are shower feeding with Swirly are you noticing water, sand, hair etc under the base of the machine and building up under the bumper guard ? I've been kicking around the idea of purchasing the Swirly to replace my Power Flite 175. The base on most of these "swing" or 175's have a terrible problem with rusting when shower feeding. The only solution I found was to pre spray with pump up etc like you usually would with encap vs shower feeding. This seems to stop or at least slow down the problem drastically. I mentioned this to our fellow friend at Oxy Dry (Robin) because I know he has always used shower feed and his solution to the problem was powder coating the base of the machine. Anywhoooo Just wondering if the Swirly looks like it'll have the same issue 🤔 Thanks in advance 😉
Would you recommend the shop vac over the standard vacuum. I'm getting back into vlm carpet cleaning with the oreck orbiter and looking for some tips. Thank you for the videos and tips.
TALLAHASSEE, Fla. (WCTV) - A record-breaking $1.6 billion Mega Millions jackpot has been claimed in Florida.On Wednesday, the Florida Lottery announced Saltines Holdings,...
So is it true that encap will lift stains after demo?
🖖👏👏👏👏
That was a nasty stain, but you didn't give up, didn't surrender!
was that grease? masterfully done!
That carpet looked pretty filthy Paul, did you manage to get the whole thing clean?
Nice work Paul. What was the wet n dry vac you used?
Nice Paul 👍 Now that you are shower feeding with Swirly are you noticing water, sand, hair etc under the base of the machine and building up under the bumper guard ? I've been kicking around the idea of purchasing the Swirly to replace my Power Flite 175. The base on most of these "swing" or 175's have a terrible problem with rusting when shower feeding. The only solution I found was to pre spray with pump up etc like you usually would with encap vs shower feeding. This seems to stop or at least slow down the problem drastically. I mentioned this to our fellow friend at Oxy Dry (Robin) because I know he has always used shower feed and his solution to the problem was powder coating the base of the machine. Anywhoooo Just wondering if the Swirly looks like it'll have the same issue 🤔 Thanks in advance 😉
Would you recommend the shop vac over the standard vacuum. I'm getting back into vlm carpet cleaning with the oreck orbiter and looking for some tips. Thank you for the videos and tips.