Nice Paul ๐ Now that you are shower feeding with Swirly are you noticing water, sand, hair etc under the base of the machine and building up under the bumper guard ? I've been kicking around the idea of purchasing the Swirly to replace my Power Flite 175. The base on most of these "swing" or 175's have a terrible problem with rusting when shower feeding. The only solution I found was to pre spray with pump up etc like you usually would with encap vs shower feeding. This seems to stop or at least slow down the problem drastically. I mentioned this to our fellow friend at Oxy Dry (Robin) because I know he has always used shower feed and his solution to the problem was powder coating the base of the machine. Anywhoooo Just wondering if the Swirly looks like it'll have the same issue ๐ค Thanks in advance ๐
Would you recommend the shop vac over the standard vacuum. I'm getting back into vlm carpet cleaning with the oreck orbiter and looking for some tips. Thank you for the videos and tips.
I purchase every little thing from Encapstore
All Skilled Stuff ๐๐ป
Help the channel by utilizing my affiliate hyperlink
You donโt pay extra, I simply obtain...
Want professional Stuff?
Equipment
Pads
Chemicals
and Moreโฆ
Be Like The Proโs @ Wa-Pro Carpet Cleaning! Follow the link below
https://encapstore.com/?aff=9
source
So is it true that encap will lift stains after demo?
๐๐๐๐๐
That was a nasty stain, but you didn't give up, didn't surrender!
was that grease? masterfully done!
That carpet looked pretty filthy Paul, did you manage to get the whole thing clean?
Nice work Paul. What was the wet n dry vac you used?
Nice Paul ๐ Now that you are shower feeding with Swirly are you noticing water, sand, hair etc under the base of the machine and building up under the bumper guard ? I've been kicking around the idea of purchasing the Swirly to replace my Power Flite 175. The base on most of these "swing" or 175's have a terrible problem with rusting when shower feeding. The only solution I found was to pre spray with pump up etc like you usually would with encap vs shower feeding. This seems to stop or at least slow down the problem drastically. I mentioned this to our fellow friend at Oxy Dry (Robin) because I know he has always used shower feed and his solution to the problem was powder coating the base of the machine. Anywhoooo Just wondering if the Swirly looks like it'll have the same issue ๐ค Thanks in advance ๐
Would you recommend the shop vac over the standard vacuum. I'm getting back into vlm carpet cleaning with the oreck orbiter and looking for some tips. Thank you for the videos and tips.